Monroe Staffing Jobs

Monroe Staffing is seeking warehouse associates for a client in Salisbury, NC. These positions are located in a chilled warehouse, with work completed in areas at or below 40 degrees F. The successful candidate will:have at least 6 months experience in warehouse workbe comfortable working in cold environmentsable to stand for entire shiftreach, bend, stoop, lift, and twist as essential functions of the jobThis position has a working start time of 9am, with varying finish times. Significant overtime will be required through early May, 12 hour days and up to 7 days/week. Pay is $14/hour. #SAL360

Monroe Staffing is a division of Staffing 360 Solutions. We are a leading staffing firm in the U.S. in the light industrial sector. We currently have a contract opening for a Refrigeration Service Technician for a large multinational food manufacturer. The ideal candidate must have at least 2 years’ proven experience with ammonia refrigeration, wastewater, boiler, HVAC, water filtration, and utility equipment/systems. Certification from a college or trade school is required. Location: Ellington, CTSalary: $20.00-$30.00/hr. Summary of the Refrigeration Service Technician:The Service Technician provides daily support, monitoring, and maintenance related to the operation, maintenance, and repair of ammonia refrigeration, wastewater, boiler, HVAC, water filtration, and utility equipment/systems and supports other areas of the plant as needed. Responsibilities of the Refrigeration Service Technician: Ensures compliance with and adherence to applicable codes, ordinances, building and safety standards pertaining to ammonia refrigeration, wastewater, boiler, HVAC, water filtration, and utility equipment/systems.Cross trains and performs general and preventive system, equipment and facility maintenance activities and responds to trouble calls.Initiates purchase orders for parts and service.Works to conserve organizational resources and stay within approved budget.Maintains working knowledge of new technologies and regulations and strives to continuously build knowledge and skills; shares expertise with others.Completes equipment logs/reports in a neat, accurate and timely manner.Assists in developing and maintaining comprehensive hazardous material and spill prevention programs.Recognizes dangerous and emergency conditions within the process and performs procedures necessary to remove the condition, shut down the process/facility and/or initiate emergency evacuation and notification procedures.Exhibits sound and accurate judgment and includes appropriate people in decision­ making process.Follows policies and procedures and observes safety and security procedures. Uses equipment and materials properly and reports potentially unsafe conditions.Performs other duties as assigned. Skills & Knowledge for the Refrigeration Service Technician:Excellent verbal and written communication skills.Excellent organizational skills and attention to detail.Strong analytical and problem-solving skills.Proficient with Microsoft Office Suite or related software. Education & Training for the Refrigeration Service Technician:High School Diploma or equivalent.One year certificate from college or technical school related to refrigeration, boiler, and/or HVAC.Skill with PLCs and Instrumentation a plus. Physical Requirements for the Refrigeration Service Technician:Prolonged periods sitting at a desk and working on a computer.Must be able to lift 15 pounds at times.May work long hours of work to reach goals, including weekend work as needed. #hub1

Mechanical Assembler 1st & 2nd ShiftJob Responsibilities for Mechanical Assembler 1st & 2nd ShiftProduces components by assembling parts and subassemblies.Ability to read schematics, blueprints, Uses hand tools or machines to assemble parts.Conducts quality control checks.Cleans and maintains work area and equipment, including tools.Assembles components by examining connections for correct fit, fastening parts and subassemblies.Verifies specifications by measuring completed component.Resolves assembly problems by altering dimensions to meet specifications; notifying supervisor to obtain additional resources.Keeps equipment operational by completing preventive maintenance requirements, following manufacturer’s instructions, troubleshooting malfunctions, and calling for repairs.Maintains a safe and clean working environment by complying with procedures, rules, and regulations.Maintains inventory by checking stock to determine supply levels, placing and tracking orders, and verifying receipt of supplies.Ability to follow instructions (written and oral)Skills and/or Qualifications for Mechanical Assembler 1st & 2nd ShiftMechanical and technical skillsFollow safety instructionsInspection of parts (Visual or tools)Good eye hand coordinationEducation, Experience for Mechanical Assembler 1st & 2nd ShiftHigh school diploma or GEDPrevious manufacturing experience

2nd shift CNC MachinistJob Summary of 2nd shift CNC Machinist: Local manufacturing company seeking a highly skilled CNC Machinist to join their team. The ideal candidate will have experience in operating and maintaining CNC machines to produce high-quality parts according to specifications. The CNC machinist will be responsible for setting up machines, selecting appropriate tools, adjusting machine settings, and monitoring the production process to ensure accuracy and efficiency.Responsibilities of 2nd shift CNC MachinistInterpret engineering drawings, blueprints, and job orders to determine specifications and requirements.Set up and prepare CNC machines for operation by installing and adjusting tools, fixtures, and workpieces.Program CNC machines using CAM software or manual programming methods.Operate CNC machines to perform machining operations such as milling, turning, drilling, and grinding.Monitor machine operations and make adjustments as necessary to ensure product quality and adherence to specifications.Inspect finished parts to ensure they meet quality standards and make any necessary adjustments to machine settings.Troubleshoot machine malfunctions and perform routine maintenance tasks to keep machines in optimal condition.Maintain accurate records of production activities, including materials used, production rates, and machine maintenance.Follow safety procedures and regulations to maintain a safe working environment.Requirements of 2nd shift CNC Machinist:High school diploma or equivalent; technical certification or apprenticeship preferred.Proven experience as a CNC machinist Proficiency in reading engineering drawings and blueprints.Strong knowledge of CNC programming and operation.Familiarity with CAM software and G-code programming.Ability to set up and operate CNC machines independently.Excellent attention to detail and precision.Strong problem-solving skills and mechanical aptitude.Good communication and teamwork skills.Willingness to work flexible hours and overtime as needed.

We are currently seeking a talented individual to join us in the role of Quality Engineer. This is a direct hire opportunity with a company in Welcome, NC, conveniently located off highway 52. The ideal candidate for this role would possess:B.S. Degree in Engineering (Electrical, Mechanical or Quality)Must have had training in Statistical Analysis & Root Cause Failure Analysis TechniquesAssist in maintaining the ISO 9001:2008 Quality Management SystemPerform scheduled Compliance and Leadership Quality Audits and provide Process Improvement Recommendations as a result of these auditsAnalyze process related non-conformancesDisposition of Supplier related non-conforming parts or assemblies found at receiving and/or in process inspection during the manufacturing processDefine and document acceptance criteria for manufacturing operationsMust have good Communication Skills to communicate with other departments, vendors, and customers. We are eager to identify individuals who not only meet these criteria but also align with company culture and values. The targeted base salary range is $78-84k. There is a possibility to receive a STIP (Short Term Incentive Plan) bonus. #SAL360

We are looking for a competent CNC Operator to use computer numerically controlled (CNC) machinery safely and accurately to perform a variety of functions - brake press or punch press or laser cutter. A keen eye for detail and great mechanical aptitude are essential. The goal is to produce high quality parts and materials by programming machines to perform the right operations.ResponsibilitiesPrepare and operate CNC machines to perform tasks such as drilling, grinding, milling etc.Understand specifications of the task at hand and the desired result by reading blueprints, mechanical drawings etc.Translate instructions into computer commands so the machines can perform the correct functionPrepare and load raw materials and parts onto the machinesPrepare a test run to check if the machines produce outputs according to specificationsSet machines to complete full cycles to fabricate large number of partsSupervise the machines while they execute the tasks and make any necessary adjustments to produce a better resultInspect and measure finished products and compare them with requirements to determine if the process has been completed properlyCheck and maintain machinery daily to ensure functionalitySkillsProven experience as CNC operatorSkill in operating CNC machinery and tooling as well as precision measurement toolsAbility to read and interpret mechanical documents and drawingsComputer savvy with basic understanding of computer programming and CAD/CAMMechanical aptitude and good math skillsA keen eye for detail and results-driven approachGood communication abilitiesHigh school diploma or equivalent required; certificate or diploma in engineering or relevant discipline is a plusThe pay for 2nd shift fabricators is $18.92 per hour, hours are 2:30pm - 11:00PM, unless overtime. Training on first shift may be required. This position REQURES documentation of high school diploma or GED.#SAL360

Monroe Staffing is a division of Staffing 360 Solutions. We are a leading staffing agency in the U.S. in the light industrial sector. We currently have an immediate opening for an Electro-Mechanical Maintenance Technician – 2nd Shift for a local manufacturing plant that manufactures carbon parts and components for the graphite and electrical industries located in East Stroudsburg, PA. The ideal candidate must have experience and knowledge of the following industrial equipment: electrical, hydraulics, pneumatics, welding, and plumbing. This position is approximately 60% mechanical and 40% electrical Payrate: $25.24/Hour or Commensurate w/ experience Days: Monday – Friday Hours: 3:00 PM – 11:30 PM 2nd Shift (Some overtime and occasional call-in for the weekend) Responsibilities of an Electronic Mechanical Maintenance Technician Performs preventative maintenance and repairs on all production machines, heating, cooling and steam systems, material-handling equipment, as well as plumbing, electrical and hydraulic/pneumatics industrial equipment.Repair, adjust, and troubleshoot all production and industrial manufacturing equipment.Repair and troubleshoot electrical and mechanical systems.Responsible for the start-up, daily operation, change-over, and shutdowns of all production and manufacturing equipment in the plant.Assist with installations of new machinery and equipment. Log, record, and track preventative maintenance procedures in the maintenance software system. Complete work orders as required. Respond to maintenance calls on the production floor. Inventory spare parts, report usage, and suggest re-order to Maintenance Lead. Communicate with Production Operators and other Maintenance Technicians to explain mechanical processes and root causes. Properly maintain tools. Qualifications of an Electronic Mechanical Maintenance Technician Must have working knowledge of 480V, 3-phase electricity. Must have previous hydraulic and repair experience.Previous experience with Programmable Logic Controllers (PLC’s) and Honeywell process controls is a big plus. Must have at least 3-5 years of experience or training with electrical, hydraulic, pneumatic, and mechanical systems and equipment. Must have 4+ years maintenance experience in a manufacturing or industrial environment. Experience in troubleshooting and reading electrical/mechanical schematics. Ability and knowledge of gauges and measurements. Machining, welding, fabrication, and millwright experience is a big plus. Must wear PPE including safety glasses and safety boots (steel-toe or composite-toe). High school diploma or GED.Strong focus on safety and quality. Must maintain good attendance. Must be able to become certified with Forklift, Scissor-Lift, and other material-handling equipment. Availability to work overtime and during off-shift hours as needed. Must pass pre-employment background check and drug screen. Must be a U.S. Citizen or Permanent Resident alien of the United States. All candidates must have one of the following documents: U.S. Birth Certificate, or U.S. Passport, or Certificate of Naturalization, or Permanent Resident Card. Physical Requirements of an Electronic Mechanical Maintenance Technician Capable of working in a manufacturing environment with noise and dusty conditions. Dusty and noisy environment due to carbon parts and manufacturing equipment. Ability to work in hot or cold temperatures and around machinery and chemicals. Capable of walking and standing for up to twelve (12) hours per day. Must be able to walk, bend, pull, and push without assistance (example: brace, cane) Frequently reach with hands and arms. Constant use of hands/fingers to handle and manipulate, parts and tools. Constantly wear PPE including safety glasses and safety boots (Steel-toe or Composite-toe). Ability to lift 50 lbs. using proper lifting techniques and equipment. Eligible employees can elect from a variety of benefits plan choices, including Medical, Dental, Vision, 401(k), Life insurance, and Short-Term Disability. #hub1

Monroe Staffing is hiring qualified assemblers for 1st and 3rd shift (8hours) with ASCO Power Technologies in Welcome, NC. These are permanent jobs with advancement opportunities, in a temperature controlled (AC and Heat!) environment right off of Highway 52. You will be using blueprints and hand tools to assemble metal components for electrical products (no electrical experience required). After initial probationary period, employees qualify for a robust benefits package including insurance, PTO, dental, and more!The ideal assembler would have:6 months or more experience in a manufacturing settingPrevious working knowledge of hand tools and air-powered toolsSome familiarity or comfort with blueprints or diagramsAbility to lift 50 pounds on occasion throughout the shift, with lifting up to or over shouldersThis position REQUIRES documentation of high school diploma or GED equivalent. Pay starts out at $15/hour. #SAL360

Monroe Staffing is a division of Staffing 360 Solutions. We are a leading staffing agency in the U.S. in the light industrial sector. We are urgently hiring a Composite Technician for a local manufacturer of molds and casts for commercial buses located in Fall River, MA. The ideal candidate should have basic experience working in a composite manufacturing environment or plastics manufacturing. This individual should have general experience with spray painting, fiberglass, spray paint guns, spray paint sprayer, hand painting, using grinders, sanders, buffers, cutters, power drills and hand tools.Previous experience with assembling, construction, or auto mechanic is also helpful. Experience with autobody repairs, auto paint repairs, or body fillers is also a big plus. Location: Fall River, MA 02721Pay Rate: 17.50/Hour + Weekly Employee BonusDays: Monday – Friday Hours: 7:00 AM – 3:30 PM Job Duties of Composite Technician:Handle large plastic and composite trim parts for commercial buses. Perform spray painting using spray guns, paint sprayer, hand painting, or gel coating. Spray fiberglass, plastics, and polyester resins. Perform hand lay-ups into molds to shape and mold parts. Laminate parts and perform painting process.Sand parts to finish and smooth surfaces. Patch and repair gel coat and paint.Buff out finished work. Prepare parts for painting. Operate power drills and hand tools. Requirements for Composite Technician:Safety shoes are required.Must be able to work in an industrial plastics manufacturing environment.Some areas of the plant will be very dusty and loud.Manufacturing plant will have a smell of plastic resin or paint in production area.Basic experience in a composite manufacturing environment or plastics manufacturing.Composite Technician should have general experience with spray painting, fiberglass, spray paint guns, spray paint sprayer, hand painting, using grinders, sanders, buffers, cutters, power drills and hand tools.Experience with autobody repairs, auto paint repairs, autobody shop, or auto bodywork is very helpful.Lifting up to 50 lbs.Must be hands-on.Must pass pre-employment background check and drug screen. Eligible employees can elect from a variety of benefits plan choices, including Medical, Dental, Vision, 401(k), Life insurance, and Short-Term Disability. #hub1

Primarily responsibilities Answer the phone and enter customer orders. Orders will be from the phone, voicemails, emails and reports.Print packing slips.Other duties are assigned.Hours are Sunday-Friday, 4:00 pm-10:00/11:00 pm.Job requirements:Bilingual - English is a must. Customer Service & computer experience is a plus.Preferably in produce or other food service company. We are looking to pay about $18.00 an hour.#CHE360

Monroe Staffing, a division of Staffing 360 Solutions, is currently hiring a Receiving Stock Shipping Clerk to join a manufacturing company located in Boonton, NJ. The preferred candidate should have a minimum of 3 months to 1 year of experience in receiving deliveries, verifying receipts, accepting shipments, and distributing materials and parts. A High School Diploma is required, and some specialized training is preferred. Location: Boonton, NJPay rate: $19.00-22.00/hourSchedule: 8:00 am – 4:30 pm, Monday to Friday Responsibilities of the Receiving Stock Shipping Clerk: Receives material, parts, products, tools, or supplies in receiving, ensures items received match the purchase order and the quantity matches the purchase order requirement.Works with Purchasing or vendors to resolve receipt discrepancies.Unloads freight carriers and signs freight bills of lading.Generates all receiving documents, delivers products to the proper inventory location, department, or personnel, and ensures that non-inventory items are issued to and signed by the requisitioner where required.Perform inspections on parts, components, and materials in accordance with the ISO 9001 Quality Management System.Responsible for documenting non-conformance material issues and works closely with the Material Disposition Review Board to resolve issues to ensure a high level of quality standard is maintained.Processes inventory transactions via SAP and assists other stock personnel with on-line transactions.Maintains inventory and makes changes to inventory locations on SAP when necessary.Cycle-counts material on a routine basis in a conscientious manner and with the highest accuracy performs re-counts and analysis of variances and assists the Materials Manager in identifying areas of improvement to maximize inventory accuracy in the stockroom, work cells, and back flush area.Assists the Supervisor in the maintenance and organization of the stockroom to ensure efficient and safe material handling.Directs, receives, and stages customer-supplied equipment/RMAs in appropriate areas.Picking kanban cards, work orders, and manual stock withdrawals.Helps with shipping as needed. Qualifications for the Receiving Stock Shipping Clerk: High school diploma required. Some advanced education preferred. At least 3-12 months of relevant experience.Mathematical skills that require the ability to add, subtract, multiply, divide, and perform metric conversions.Good oral and written communication skills to interact with employees required.Must be able to read and understand blueprints and warehouse paperwork.Must be comfortable regularly lifting to 75 pounds and frequently lifting up to 25 pounds.Requires a strong knowledge of Microsoft Office Suite applications. #HUB1

Monroe Staffing, a division of Staffing 360 Solutions is currently hiring for a Mechanical Maintenance Technician/Millwright at a reputable manufacturing facility in Youngstown, OH. The ideal candidate will have a minimum of 3 years industrial experience and is required to pass a mechanical assessment test. Associate degree in mechanical technology, journeyman machine repairman preferred. Following all safety rules and precautions is required. Hours: 12 hr. shifts 4 days (Overtime required) Pay Rate: $28 hour (pay increase to $31.80 after 120 days) Responsibilities of a Mechanical Maintenance Technician Ability to make rounds and work on Preventative/predictive maintenance issues.Handling Mechanical delays and mechanical repairs throughout the mill.Ability to work items like hydraulic machinery, welders, and larger CNC machines as well.Finding ways to reduce maintenance costs and keeping inventory of parts for repairs and mill needs.Responsible for participating in improvement Maintenance activities (CIT, MADE, RCA, and CAPEX)Reviewing and improving SKILL BASED pay plant curriculum.Responsible for work effectiveness regarding wrench time, required competencies, overtime, etc. Qualifications Mechanical Maintenance Technician Associate degree in Mechanical Technology, Journeyman Machine Repairman or Journeyman Millwright card preferred.Trouble shooting hydraulic, industrial and control equipmentJourneyman Millwright a plusFanuc and Robot (ABB) experience is a plusMinimum (3) years industrial experience in a Maintenance Role.Required to follow and abide by all safety rules and use proper PPECapable of lifting 50 pounds on a routine basis.Must be able to work in confined areas, work at heights and wide range temperatures.Ability to work rotating shifts and overtime.Required to pass the Mechanical assessment test.Proficiency in Mechanical Troubleshooting including Power Transmission, Hydraulics, and Pneumatics#hub1